Command and
Information Center
(CIC) is the nerve
center for Flight Operations, conducting combat operations
utilizing the Akira's Spacefighter Wing, and sifting through
the numerous sensor plots and intelligence gathered by the
fighters. A large room, the CIC is twice as large as the
Ship's bridge, and is fully manned through all duty shifts.
CIC General Overview:
Primary Flight Operational
Control of the Akira-class is provided by the CIC, located on
deck 13 aft. The CIC directly supervises all
primary and secondary Flight Operations and coordinates all
Flight, Search and Rescue, and Fighter-based activities.
Layout:
The CIC is unique to the
Akira-class, and closely resembles a Starbase
Bridge/Operations Center. The central area of the CIC provides
a large holographic display, viewable from the entire CIC.
Attached to the holoprojector are the CIC Supervisor, and his
two executive officer's consoles. Identical in size and design
to the bridge Mission Operations console, these consoles are
the heart of the CIC. All information pertaining Flight
Operations, Maintenance Schedules, Intelligence Gathering, and
whatever operations the CIC is currently engaged with, can be
accessed by these consoles.
Directly fore of the holoviewer
are the Flight Ops Officers. The 8 FO Officers are equipped
with a console that proceeds across the entire Foredeck, each
with access to visuals of Flight Decks, Fightercraft,
Shuttlecraft, along with Helm and Science information from the
bridge. The FO's are in charge of maintaining full flight
operation efficiency.
Aft and to the left of the
command area is an elevated platform on which is located the
tactical/security control station (comprised of two consoles,
one for tactical, and one for security, located directly
behind tactical and along the back of the CIC area). Each
console is manned by 2 officers, and their role is to keep the
CIC CO appraised of missions objectives in combat operations,
should the Akira enter combat, along with the status of Flight
Operations in the Combat Zone.
Against the Starboard wall of
the CIC, on a raised platform, is a large master systems
display monitor, similar to the one in main engineering and
identical to the display monitor on the Bridge. All relative
ship information (such as damage, power distribution, etc.) is
displayed on the cutaway image of the Akira-class. This
monitor can be used to direct ship operations and can be
configured for limited flight control if necessary.
In front of the CIC master
systems display monitor is a large engineering console. This
has a smaller cutaway diagram of the Akira-class, which
displays all engineering-relevant data and shows warp fields
and engine output. This console also has priority links to the
computers, the WPS (Warp Propulsion System), the IPS (Impulse
Propulsion System), navigation, SIF, and IDF, and is a backup
console for the Main Engineer to access Engineering
subroutines and protocols away from Main Engineering. Although
usually unattended, the Chief Engineer can bring this console
to full Enable mode by entering voice codes and undergoing a
retinal scan. In its typical configuration, the CIC Engineers
Mate maintains work schedules and verifies repair, maintenance
and refit programs for the various fighters and shuttlecraft
aboard the Akira-class vessel.
Against the port side walls of
the main bridge are the consoles for Science and others that
are programmable for a multitude of functions. There are two
fully programmable multi-mission consoles. These consoles have
access to all science, navigational, sensor, and
communications systems. These consoles are typically
configured for Intelligence Gathering and collating data
retrieved by Shuttlecraft or Fighter craft.
There is also an emergency
ladder that connects the CIC to Upper Engineering. There are
also two doors on the aft platform of the bridge, the
starboard door leads to the CSW Commander's Office, the port
side aft door leads to Flight Operations.
|